Industrial Marketing Company

Bottle Tray Dryer

click on picture to zoom
share this product link

General Specification:

Construction : External : 2 mm Thkinternal : 2 mm Thkmoc : cGMP
Surface Finish : External : Buffed to 150 grit matt finish Internal : Buffed to 220 grit mirror finish.
Inlet & Outlet : All dryers have a 5 micron pre filter r at the inlet and a manually infinite adjustable damper at the outlet.
Door : Doors at provided at the front and / or rear side of the tray dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors.
Air Circulation : Air circulation is done by specially designed recirculation blowers inside the tray dryer. The blower capacity, static & design depends on the size and model of dryer.
Heating : Dryers are normally supplied with either steam/ electric/ thermic fluid / hot water heating system. Suitable heating coils / caloriefiers are provided in the dryers.
Temperature Control : Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic.
Trays : Trays are available in S.S. 304/ 316 q. All trays are fully die pressed and with cooved corners. Trays are buffed to mirror finish. Trays are also available in aluminum / Polypropylene / Frp/ M.S. galvanized as per clients requirements.
Trolley : Trolley is provided in the dryers to accommodate trays in it. Trolley truck are used to load and unload the trays into the dryer.
Control Panel : Automatic Control panel is fitted on the side of the dryer. If consists of Starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons , timers, controllers etc.

Technical Specification:

MODELS	TD-12	TD-24	TD-48	TD-96	TD-192
Loading capacity	12 Trays	24 Trays	48 Trays	96 Trays	192 trays
External Dimension in mm	W D H 1370 X 530 X 940	W D H 1370 X 940 X 940	W D H 1980X1020X1880	W D H 3320X1900X1880	W D H 3320X1900X1880
Internal Dimension in mm	840 X 430 X 840	840 X 860 X 840	1020 X930 X1830	1960 X930 X1830	1960 X930 X1830
No of Doors	One	One	One	Two	Two
No of Blowers	One	Two	One	Two	Four
No of motors/H.P.3 PHASE 415 VOLTS.	1/0.5 H.P.3 phase 415 volts.	1/0.5 H.P.3 phase 415 volts	1/1 H.P.3 phase 415 volts	2/1 H.P.3 phase 415 volts	Four/1 H.P.each3 phase 415 volts
Electrical Heating Load for100°C/200°C/300°C	3kw/6kw/9kw	6kw/9kw/12kw	9kw/15kw/18kw	15kw/21kw/27kw	36kw/42kw/48kw
Steam Heater No. of coils.	2	2	2	2	2
Steam Pressure	3.3 kg/cm2	3.3 kg/cm2	3.3 kg/cm2	3.3 kg/cm2	3.3 kg/cm2
Steam consumption	25 LBS/hr	45 LBS/hr	60 LBS/hr	80 LBS/hr	120 LBS/hr
Insulation in mm100°C/200°C/300°C	50/75/75	50/75/75	50/75/75	50/75/75	50/75/75
No of Trolleys	Rack System	Rack System	One	Two	Four
Tray Size	812X 406 X 31	812X 406 X 31	812X 406 X 31	812X 406 X 31	812X 406 X 31
Trolley Dimension	Fixed Racks	Fixed Racks	840X960X1780	840X960X1780	840X960X1780

Back to All Product

Note : All trademarks, logos and names are properties of their respective owners. Images shown here are only illustrative; Actual designs & specification may differ

Designed & Maintained by Nyneishia Technologies